You have 0 items in your cart.
Voltage/Current
Category:
Power analysers/Power meters
PRO0030 BASE UNIT POWER AND HARMONICS ANALYZER WITH 3 x 1000A CLAMPS Optional: PRO0041- 3 x 3000A Flexible Clamps Optional: PRO0038- 3 x 100A Clamps
Category:
Power analysers/Power meters
Features: •Analysis for 3 phase multi-power system, 1P/2W,1P/3W, 3P/3W, 3P/4W •Voltage & Current are the True RMS value. •True Power ( KW、MW、GW ) measurement. •Apparent Power ( KVA、MVA、GVA ) measurement. •Reactive Power ( KVAR MVAR、GVAR) measurement. •Watt-Hour ( WH、SH、QH、PFH ). •Power Factor( PF )、Phase Angle( Φ ). •Voltage measurement range : 10 to 600 ACV •Current measurement range: 0.2A to 1200 ACA. •Programmable CT ratio (1 to 600) and PT ratio (1 to 1000). •ACV input impedance is 10 Mega ohms. •Safety Standard : IEC 1010, CAT III 600V •Built-in clock and Calendar, real time data record with SD memory card , sampling time set from 2 to 7200 seconds. Just slot in the SD card into the computer, it can down load the all the measured value with the time information ( year/month/data/hour/mimute/second ) to the Excel directly, then user can make the further data analysis by themselves. •Measurement: * ACV * ACA * AC WATT ( True Power )AC WATT( Apparent Power )AC WATT( Reactive Power ) * Power factor * Phase angle * Frequency Standard Accessories: * Instruction manual.......................1 PC * Test Leads...
Category:
Power analysers/Power meters
Features: •Analysis for 3 phase multi-power system, 1P/2W, 1P/3W,3P/3W, 3P/4W •3 current probes ( CP-1201 ) are included, if change the current probes, the calibration procedures are not necessary •Current probe input signal/ranges with selection:Input signal (ACV):200 mV/300 mV/500 mV/1 V/2 V/3 VRanges (ACA) : 20 A/200 A/2000 A/30 A/300 A/ 3000 A. •Meter can cooperate the universal current probes •Measurement: V (phase-to-phase), V (phase-to-ground) A (phase-to-ground) KW / KVA / KVAR / PF (phase) KW / KVA / KVAR / PF (system) KWH / KVAH / KVARH / PFH (system) Phase angle •Harmonics display (1-50th order) •Simultaneous display of Harmonics and Wave form •Display of Waveform with Peak Values •Analysis of Total Harmonic Distortion ( THD ) •Graphic Phase diagram with 3-Phase system parameters •3 phase Voltage or Current Unbalanced Ratio ( VUR, AUR ) and Unbalanced Factor •Calculated Unbalanced Current through Neutral Line ( An ) Standard Accessories: * Instruction manual............... 1 PC * Test Leads (TL88-4AT).......... 1 Set (4 PCs) * Alligator clips (TL88-4AC) 1 Set (4 PCs) * Clamp Probe ( CP-1201 )....... 3 PCs * AC to DC 9V adapter..............1...
The EasyLog USB Voltage Data Logger measures and records voltage readings over a 0 to 30 Volts DC range. The Voltage Logger features 32K of data storage capacity, user selectable sampling rate and start time and direct usb connection to PC for downloading of data. The logger software allows for data to be graphed, printed and exported to other applications. Correct functioning of the unit is indicated by flashing red and green LED USB Voltage Logger Includes >> Measurement Leads with Terminated Crocodile Clips >> Windows PC Software >> 1/2 AA 3.6V Lithium Battery USB Voltage Data Logger Features USB Interface for Set-up and Data Download User-Programmable Alarm Thresholds Status Indication via Red and Green LEDs Replaceable Internal Lithium Battery EasyLog USB Voltage Logger Specifications Data Storage Capacity 32,000 Samples/Readings Measurement Range 0 to 30 VDC Internal Resolution 50 mV DC Accuracy (Overall Error) ±1% Logging Rate 1s, 10s, 1m, 5m, 30m, 1hr, 6hr, 12hr Logger Operating Range -25 to 80°C(-13 to 176°F) Battery 1/2AA 3.6V Lithium Battery, 1 year typical life * OS Compatibility...
USB Current Logger Features 4-20mA Current Loop Measurement Range Sampling Rates between 1s and 12hr Stores 32,000 readings Connection via two screw terminals USB Interface for Set-up and Data Download User-Programmable Alarm Thresholds Red and Green LED Status Indication Replaceable Internal Lithium Battery EasyLog USB Current Logger Specifications Data Storage Capacity 32,000 Samples/Readings Measurement Range 4-20 mA dc Internal Resolution ± 0.05 mA dc Accuracy (Overall Error) ±1% Sampling Rate 1s, 10s, 1m, 5m, 30m, 1hr, 6hr, 12hr Operating Range -35°C to 80°C (-31°F to 176°F) Battery 1/2AA 3.6V Lithium Battery, 1 year typical life* OS Compatibility Windows XP, Vista, 7 (32-bit and 64-Bit Versions) Standards Compliance RoHS *Depending on sample rate, ambient temperature and use of alarm LEDs USB Current Loop Data Logger Applications Monitor 4-20mA Loop Signals from Industrial Sensors for Industrial Machinery and Processes The EasyLog Software is available as a free download and with the purchase of a Lascar USB Data Logger. The software allows for the configuration of each logger,...
The pocket-sized Shuttle provides a convenient way to readout and relaunch many of the HOBO data loggers and bring the data back to your host PC. The HOBO Shuttle works with the HOBO U-series loggers and HOBO Weather Stations and Micro Weather Stations. Features 4 MB non-volatile memory, allowing you to readout many loggers (504 loggers with 8K memory - some Pendant Loggers) (63 loggers with 64K memory - most U-Series Loggers) (7 loggers with 512K memory - weather/micro stations and FlexSmart Loggers) Fast logger offload Synchronizes HOBO data logger clocks Synchronizes relaunch: sets the HOBO sample times to be synchronized with the prior launch sample times Checks loggers' battery status Checks and displays its own battery status Displays current readings for many loggers Provides basic smart sensor diagnostics Automatically powers down when not in use, to prolong shuttle battery life Backup battery allows for changing shuttle batteries in the field Convenient direct USB connection to host computer Specifications Operating Temperature Range 0 to 50C (32 to 122F) Survival Temperature -10 to 50C (14 to 122F) Operating RH Range 0 to 95%,...
0 to 10 Volts DC External Input Cable>> Input Range: 0 to 10 Volts DC >> Impedence: 20 KΩ with 0.6 mV Resolution >> Cable: 13mm (0.5") Tinned Braided Wire Leads >> Cable Length: 1.9 Meters (6.3 feet) >> Indoor Use Only
4-20mA Input Cable >> Cable for Connecting Sensor with 4-20mA Output to Logger >> Length: 18.5" >> Use in Outdoor and Indoor Environments