You have 0 items in your cart.
Category:
Tachometer/Stroboscopes
TST0076-460 rpm measuring instrument incl. protective cap, batteries and calibration protocol TST0076-460; rpm measuring instrument incl. protective cap, batteries and calibration protocol Optically measures rpm, e.g. of ventilators and shafts. The measurement spot is displayed on the measurement object with an LED marking. Max./min. values are displayed directly at the press of a button. The backlit display allows the measurement values to be easily read out, even in unfavourable light conditions. TST0076 is very handy, small and easy to operate. Optical rpm measurement with LED measurement spot marking Max./min. values Incl. calibration protocol Protective cap for safe storage Including wrist strap and belt holder Display light Reflective markers Storage temperature -40 to +70 °C Operating temperature 0 to +50 °C Battery type 2 batteries Type AAA Battery life 20 h Weight 85 g Dimensions 119 x 46 x 25 mm Probe type RPM Accuracy ±(0.02 %of mv + 1 dígito) Resolution 0.1 rpm (100 to 999.9 rpm) 1 rpm (1000 to 29.999 rpm)
Category:
Digital Multimeter(DMM)
CAT IV 600VLCD Backlit Display, with maximum reading of 3999AC voltage range: 0 to 600V.DC voltage range: 0 to 600V.AC Current range: 0.1A to 10A.DC Current range: 0.1A to 10A.Auto power off (15 minutes).ACV, DCV, ACA, DCA, Resistance, Diode, Frequency, Capacitance, Duty Cycle, Continuity, Range Hold, Data Hold, REL.Accessories.
Category:
Digital Multimeter(DMM)
CAT IV 600VLCD Backlit Display, with maximum reading of 3999.Analog Bargraph DisplayTrue Rms.AC voltage range: 0 to 1000V.DC voltage range: 0 to 1000V.AC Current range: 0.1µA to 10A.DC Current range: 0.1µA to 10A.Auto power off (15 minutes).Min/Max.ACV, DCV, ACA, DCA, Resistance, Diode, Frequency, Capacitance, Duty Cycle, Continuity, Temperature, Range Hold, Data Hold, REL.Accessories.
Category:
Digital Multimeter(DMM)
CAT IV 600VLCD display with maximum reading of 6000, plus decimal point.Analog Bargraph.AC voltage range: 0 to 600V.DC voltage range: 0 to 600V.Auto power off (15 minutes).Frequency measurement.AC and Frequency measurement with only one test lead.Phase sequence test.Phase conformity test.Continuity test.Double injection outer case.
Category:
Hardness tester
WEBSTER HARDNESS TESTERS W Series Webster Tester is a portable instrument which can on-site test soft metals quickly. The Webster Hardness Tester is used to inspect the result of heat treatment, to sort the materials in the warehouse, and to test the long workpieces inconvenient taken to the lab. The Webster hardness tester is very suitable for quality inspection of batch products one by one in the production field. The hardness value can be read directly on the indicator dial. MODEL B Webster Hardness Tester is the choice of virtually every aluminum extrusion manufacturer. This first hardness tester specially crafted for aluminum has improved the aluminum industry. A test can be completed by one press. Model W-20 equivalent to Model B Tester Models for testing brass, copper and mild steel respectively Modification models for testing thick pieces or slim tubings Tests sheets, extrusions, pipes Very fast, very simple and very portable Small indentation Conforms to ASTM B647 Recommended in YS/T420. Webster Hardness Tester for Aluminum Alloys W-20, W-20a, W-20a, W-20b MODEL Dimension of specimen NET...
Category:
Moisture meters
Equipped with 10 characteristics curves for soft wood, hard wood, chipboard, anhydrite screed, cement screed, lime sand brick, aerated concrete, concrete, vertical hole brick and solid brick Measurement depth up to 5 cm Handy shape for optimum contact pressure Hold, max., min. function Illuminated digital display Characteristics curves were developed in cooperation with the LPI institut Advantageous for measurements on exotic woods: non-destructive determination of wood moisture TST0269 TST0269, wood and material moisture measuring instrument, incl. battery and calibration protocol The TST0269 allows fast and non-destructive observation of the material moisture of woods and building materials. This allows the ideal time and place for any destructive measurement which may be necessary to be determined. The display is in percent by weight in comparison to the dry mass of the material. The TST0269 makes work easier for all those who need to observe the development of drying in floors, walls and surfaces. Equipped with 10 characteristics curves for soft wood, hard wood, chipboard, anhydrite screed, cement screed, lime sand brick, aerated concrete, concrete,...
Category:
Moisture meters
TST0100; wood and building material moisture meter, incl. protective cap, batteries and calibration protocol 606-1 measures material moisture. Material moisture is displayed in percent by weight using stored material characteristic curves for wood and building materials. Accurate wood moisture measurement with stored characteristic curves for beech, spruce, larch, oak, pine, maple Additional characteristic curves to locate wet points in building materials for cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar, brick Hold function for easy readout of readings Display illumination Self-test function Protective cap for safe storage Belt case, wrist strap and calibration protocol included Made in Germany Latest technology Storage temperature -40 to +70 °C Operating temperature -10 to +50 °C Battery type 2 batteries Type AAA Battery life 200 h Weight 90 g Dimensions 119 x 46 x 25 mm Probe type Conductive measurement cell Meas. Range 0 to 50 % Accuracy ±1 % Resolution 0.1 Additional benefits for TST0101: Measurement of temperature and humidity in ambient air Air humidity...