You have 0 items in your cart.
Fluke
Sub Categories
Category:
Benchtop Multimeters
6.5 digit resolution Basic V dc accuracy of up to 0.0035 % Dual display 100 μA to 10 A current range, with up to 100 pA resolution Wide ohms range from 10 Ω to 1 GΩ with up to 10 μΩ resolution 2 x 4 ohms 4-wire measurement technique Measures frequency and period Fluke 45 and Agilent 34401A emulation Graphical display Trendplot paperless recorder mode, statistics, histogram CAT I 1000 V, CAT II 600 V For the 24 ppm Model See Fluke 8846A
Category:
Benchtop Multimeters
6.5 digit resolution Basic V dc accuracy of up to 0.0024 % Dual display 100 μA to 10 A current range, with up to 100 pA resolution Wide ohms range from 10 Ω to 1 GΩ with up to 10 μΩ resolution 2 x 4 ohms 4-wire measurement technique Both models measure frequency and period Measures capacitance and temperature USB memory drive port Fluke 45 and Agilent 34401A emulation Graphical display Trendplot paperless recorder mode, statistics, histogram CAT I 1000 V, CAT II 600 V For the 35 ppm Model See Fluke 8845A
Category:
Cables & Hardware
8-conductor (4 twisted pair) unshielded cable (48 inches) with an 8-position modular plug (RJ45) on each end, with an overmold boot/strain relief Rated working voltage: 100 V rms maximum Operating temperature range: -40 ºC to +80 ºC
Category:
Cables & Hardware
Supports the Fluke 120 Series, Fluke 190 Series ScopeMeters, as well as the 43 and 43B and 430 Series Power Quality analyzers Supports Windows Vista/ XP/2000/Me/98 SE Cable length 1.5 m (4.9 ft)
Category:
Cables & Hardware
Safety designed serial interface for digital hard-copy output to serial printer or remote control and data exchange with a PC. Compatible with all Fluke ScopeMeter® test tools, with Power Quality Analyzers, Graphical MultiMeters and MultiFunction Counters. Hard Copy: ScopeMeter test tools support Epson FX/LQ Series, LaserJet and DeskJet compatible printers Remote control: Waveforms, Scope and Meter measurements, Front Set-ups and performance verification/calibration Transfer rate: up to 57k6 Baud
Category:
Cables & Hardware
50 Ohm Coaxial BNC cable set, 3 x 0.5 m. Three colored BNC male connectors (red, gray, and black) for easy identification.
Category:
Calibrators
A large display and simple, pushbutton interface for ease of use. Simultaneous mA and % readout for quick, easy interpretation of readings. mA accuracy of 0.02% Push button 25% steps for fast, easy linearity checks. Save time over traditional knob type controls. "Span Check" for fast confirmation of zero and span. Selectable slow ramp, fast ramp, and step to provide smooth outputs for valve slewing and loop functional tests. 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM. Single 9V battery that is easily changed. 0 - 20 mA or 4 - 20 mA default start up modes.
Category:
Calibrators
Large display and simple, quick-click interface for easy one-handed operation Simultaneous mA and % readout for quick, easy, interpretation of readings mA accuracy of 0.015%, superior to other loop calibrators in this price range 1µA resolution for mA source, simulate and measure Push button 25% steps for fast, easy linearity checks 0-100% "span check" for fast confirmation of zeroand span Measures V dc to 28 V Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM Single 9 V battery that is easily changed 0-20 mA or 4-20 mA default start up modes Innovative output adjustment dial with 1 µAand 100 µA resolution HART™ mode connects 250 W resistor in serieswith 24 V loop for compatibility with HART communicators. Also available Fluke 707EX Intrinsically safe model